| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 364|Reply: 3

how do I access the menu to change the IP address on a Sharp MX-3501N

[Copy link]

Post time: 2012-6-27 19:22:28 |Show all posts
how do I access the menu to change the IP address on a Sharp MX-3501N printer?
--Sharp MX-3501N All-In-One Printer

Post time: 2012-7-1 21:00:05 |Show all posts
You can print the configuration data by Simulation 22 sub 6.
This is how to :
1) #/P key (program) ON → Asterisk (*) key ON → CLEAR key ON →
Asterisk (*) key ON → Ready for input of a main code of simulation
2) Entering a main code with the 10-key → START key ON
3) Entering a sub code with the 10-key → START key ON
4) Select an item with the scroll key and the item key.
5) The machine enters the mode corresponding to the selected item.
Press START key to start the simulation operation.
To cancel the current simulation mode or to change the main code
and the sub code, press the CUSTOM SETTINGS key.
* Canceling the simulation mode to return to the normal mode
1) Press CLEAR ALL key.

Post time: 2012-6-30 20:07:31 |Show all posts
Try doing a cold reset first, then check that DHCP is manual not Auto. then try to input IP address again.  If the Network card is seperate then you may only have to replace the Nic

Post time: 2012-6-29 07:19:31 |Show all posts
Hello,First, I would try resetting the modem by unplugging for 10 seconds or so and then plugging it back in. To be on the safe side, I would also reboot computer. AFter that, I would try to see if it picks up valid ip address. If it doesn't, you may need to call your cable internet provider and perhaps get the mac address of your modem in their system (if it's not already)
Dman
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-10-1 04:13 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top