| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 2207|Reply: 6

Ricoh 2022, 1224c and 2238c firmware

[Copy link]

Post time: 2010-9-25 10:04:10 |Show all posts
Hi all
Can anyone forward me the latest firmware revisions for the following Ricoh copiers:
Ricoh 2022
Ricoh 1224c
Ricoh 2238c
Much appreciated!

Post time: 2012-7-6 23:42:44 |Show all posts
Awesome resource! I was looking for this for a long time and just found it here in this community. Thanks @cmkzjw

Post time: 2010-12-5 20:44:45 |Show all posts
Unfortunally the files are way too big to send over mail, but I've made them available from our webserver, here you go:
http://www.linford.se/serviceimages/2022.rar
http://www.linford.se/serviceimages/1224C.rar
http://www.linford.se/serviceimages/2238C.rar
It's all the available updates, at their latest versions. Heads up on the 2238C NIB firmware, there were one version 4.13.1 released 3-2-2004, and another version 1.03 released 6-4-2005. Don't know which one you should use, I thought it was a bit strange the lower number version was released later...
The memory card explorer demo software is packed with the 1224C.
Best of luck!

Post time: 2010-11-21 13:48:38 |Show all posts
I could give it to you, but I don't have the software for the card that I've been told you need to do an upgrade. The software is called 'Memory card explorer' and needs to be installed on the PCMCIA card to get fw upgrade to work. I've never done an upgrade on these machines myself so I'm not sure though...
----------------------------
thanks Daniel
Would you mind sending them to my email address?
Many thanks

Post time: 2010-11-7 06:52:31 |Show all posts
Oh alright. Well then, you still need the software though... I have only a 30 day trial version, give me a shout if you want it.

Post time: 2010-10-23 23:56:24 |Show all posts
NOP, needs to be installed on you computer, the PC needs a PCMcia slot in order to work, the Ricoh Memory Card Explorer is the sofrware needed to load your BIN files to the card, the rest is the same as the SDcard proceedure.

Post time: 2010-10-9 17:00:17 |Show all posts
I could give it to you, but I don't have the software for the card that I've been told you need to do an upgrade. The software is called 'Memory card explorer' and needs to be installed on the PCMCIA card to get fw upgrade to work. I've never done an upgrade on these machines myself so I'm not sure though...
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-9-30 02:19 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top