| |
| | |

Printer Forum   

 Forgot password?
View: 724|Reply: 4


[Copy link]

Post time: 2012-11-11 11:19:19 |Show all posts
--Canon imageRUNNER C3200 Copier

Post time: 2012-11-11 17:44:16 |Show all posts
E007 error means tha there is an error in the rotation of the upper fixing unit. (the hot bit)
On these machines it looks like a roller but is in fact a thin filmwith a heater inside it. The film is probably damaged or split. thisnormally happens at one end. On the end of the film there is a whitepatch that is read as it goes round and it is that not being read thatgives the error.

Post time: 2012-11-11 15:54:26 |Show all posts
A E-000007-000 means that the fixing film in the fixing unit can not find the "Home Postion" for the film. Most likely the fixing film is ripped and the film has proble moved to one side. Basicly you are going to have to have the film adjusted back to HP or the film needs to be replaced. Have you seen any little pieces of thin Black plastic come out of the copier, also is the toner not bring fixed into the paper....  Good Luck..... You may need to call in for reinforcements to solve the code... It will not clear till it is repaired

Post time: 2012-11-11 14:33:04 |Show all posts

November 7, 2002

Product : IR 2200 / 2800 / 3300 Title : E007 code for the IR 2200 / 2800 / 3300 Problem :
E007 code is occurring for the IR 2200 / 2800 / 3300
Solution :
In Service mode / Copier / Function / Part Check, energize M4 (the Fixing Drive motor).  If the Fixing Drive motor does not come on, replace M4 (part number FH6-1848-000). Canon USA, Inc. Systems & Technical Support Division
you access service mode by pressing ADDITIONAL FUNCTIONS-2-8-ADDITIONAL FUNCTIONS

Post time: 2012-11-11 13:07:14 |Show all posts
fixing film of fuser unit.change it
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2017-6-23 03:58 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2017 OASQ.

To Top