| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 245|Reply: 3

c1110b printer has error message 061-370

[Copy link]

Post time: 2013-1-4 10:54:42 |Show all posts
c1110b printer has error message 061-370
--Fuji DocuPrint C1110B Laser Printer

Post time: 2013-1-10 22:25:37 |Show all posts
You should try to reinstall the firmware update. It was interrupted and that could have led to this problem.

Post time: 2013-1-8 12:56:01 |Show all posts
While the printer is on, unplug the power cord from the back of it directly. Plug it back in after 1 minute.
Cheers,

Post time: 2013-1-6 19:56:21 |Show all posts
From the service manual:
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Laser Unit for correct
installation.
Is the Laser Unit correctly installed?
Go to step 3. Reinstall the
Laser Unit. Go
to step 2.
2 Cycle the power.
Does the error still occur?
Go to step 3. Complete.
3 Check the wiring harness connectors
P/J40, P/J41, P/J411, and P/J412
between the MCU Board and the Laser
Unit.
Are the connectors securely
connected?
Go to step 5 Reconnect the
connectors. Go
to step 4.
4 Cycle the power.
Does the error still occur?
Go to step 5. Complete.
5 Replace the Laser Unit (page 8-31).
Does the error still occur?
Replace the
MCU Board
(page 8-59).
Complete.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-11-26 09:14 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top