| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 1348|Reply: 0

Ricoh copiers error code messages

[Copy link]

administrator

Post time: 2013-3-20 08:58:20 |Show all posts
RICOH Error code list

RICOH Error Code List:
Ricoh error codes are generally categorized into 9 categories. Each category starts with a unique number starting from 1 to9. A brief description is given below:
(a). 1xx Series (Scanning Related Problems)
CODE
       
POSSIBLE CAUSE
SC 101
       
Exporsure Lamp error
SC107
       
Scanner Lamp Regulator Malfunction
SC120
       
Scanner Home position Error
SC121
       
Scanner home position error 2
SC 122
       
Scanner home position error 3
SC 123
       
Scanner home position error 4
SC 124
       
Scanner Motor encoder signal error
SC 125
       
Scanner motor speed error1
SC 126
       
Scanner motor speed error2
SC 127
       
Scanner motor encoder rotating direction error
Sc 128
       
Scanner motor start error
SC 129
       
Scanner motor speed control error
SC 130
       
SBU defective error/ Scanner start abnormal
SC 131
       
F-Gate Asserted during shading
SC 142
       
White level detection error
SC 143
       
SBU Auto adjust error
SC 144
       
SBU Connection error
SC 150
       
Scanner ROM Mismatch
SC 170
       
Scanner DA1 Abnormal/Video processing
SC 171
       
Scanner DA2 abnormal
SC 173
       
Scanner Lamp regulator adjustment error
SC 174
       
Scanner DA2 abnormal
SC 181
       
CIS Lamp abnormal
SC 183
       
CIS auto adjustment error
SC 184
       
CIS Transmission error
SC 191
       
Bar Code Scanning error
SC 192
       
Automated SBU adjustment error/Bar code number is different
SC 193
       
Image Transfer Error
SC 194
       
SBU White level detection
SC 195
       
DF Gate Assert error
SC 196
       
DF Gate Negate error
SC 197
       
DF Gate Error
SC 198
       
Memory card error
SC 199
       
DF Scanning finish error
Troubleshooting Tips:
SC101:Exposure Lamp error:
·                     Exposure Lamp defective
·                     Check exposure lamp connections and the stabilizer board.
·                     Dirty scanner mirror or scanner mirror out of positions.
·                     SBU board defective
SC143:SBU white/black level correction error:
·                     Exposure lamp defected.
·                     Dirty white plate.
·                     BICU Board defective
SC198:Memory address error:
·                     The firmware program of the engine and the controller do no match.
·                     Controller Board defective
(b) 2XX Series For Laser Unit Problems
CODE
       
POSSIBLE CAUSE
SC201
       
Polygon Motor
SC220
       
Laser Sync Detect
SC221
       
Scan length detection
SC240
       
LD Power Supply Excessive
SC260
       
HP Sensor
SC261
       
HP Sensor not turning off
SC285
       
Line position Error
In some models (AF 2015 etc) 2xx error series does not exist.
(c) 3xx and 4xx Series Image Development Problems.
CODE
       
POSSIBLE CAUSE
SC320
       
Polygonal mirror motor
SC322
       
Laser synchronization
SC324
       
LD Drive current over
SC325
       
Magnification Correction
SC328
       
LD Unit Home Position Error2
SC330
       
LD Unit no initial setting
SC343
       
Yellow Sleeve Motor Lock
SC344
       
Magenta Sleeve Motor Lock
SC364
       
Hard Disk Drive
SC365
       
Image Storage Address Error
SC366
       
Hard Disk Bad Sector Maximum
SC371
       
Yellow TD Sensor Detection Error
SC372
       
Cyan sensor Detection Error
SC373
       
Magenta TD Sensor Detection Error
SC401
       
Transfer Output Abnormal
SC402
       
Transfer Roller Leak
SC403
       
Transfer Belt Position Sensor
SC405
       
Transfer Belt Position Abnormal
SC420
       
Cleaning Motor Lock
SC430
       
Quenching Lamp
SC440
       
Main Motor Lock
SC441
       
Development Motor Lock
SC457
       
Image Transfer Belt Cleaning Unit Position Error
SC460
       
Thermistor1 Temperature
SC461
       
Thermistor2
SC490
       
Toner Supply Motor Leak
Exhaust Fan Motor Lock
Main Fan abnormal
Transfer Bias Paper Attraction Roller Bias Leak
Troubleshooting Tips:
SC302:Charge Roller Current leakage
·                     Clean the machine well.
·                     Charge roller damaged.
·                     Poor connection of the PCU
SC392:Toner density sensor initial setting is not performed correctly.
·                     No developer
·                     Developing roller does not turn.
·                     Development roller coupling gear is not correctly attached.
·                     Poor connection of PCU
·                     ID sensor defective
SC402: Transfer roller lead error 2
·                     High voltage supply board defective
·                     Transfer/Separation unit set incorrectly
·                     Transfer roller damaged
(d) 5xx Series For Paper Feed and Fusing Problems
CODE
       
POSSIBLE CAUSE
SC500
       
Main motor/transport motor lock/Fusing motor error
SC501
       
Drawer 1 lift motor malfunction
SC502
       
2nd or 1st tray lift motor malfunction
SC503
       
Drawer3(or 2nd) lift motor error
SC504
       
Drawer 4 or 3rd lift motor malfunction
SC505
       
LCC Tray malfunction
SC506
       
Paper tray motor lock
SC507
       
LCT main/feed motor lock
SC508
       
Rear fence drive motor
SC509
       
Drawer 3 LCT right fence error
SC510
       
LCT lower limit error
SC511
       
LCC motor lock
SC515
       
Drawer left guide drive motor error, Tandem rear fence motor error
SC516
       
Drawer 1 side guide motor error
SC520
       
Paper tray error/Duplexer jogger drive motor error
SC521
       
Duplexer jogger driver motor error 2
SC522
       
Duplex-Side fence jogger HP error
SC524
       
Duplex-End fence jogger HP error
SC530
       
Bypass feed motor lock/fusing fan motor error
SC531
       
Fuser/Duplexer reversing motor error
SC541
       
Fuser thermistor open/ Hot Roller thermistor open
SC542
       
Fuser Temperature warm-up error
SC543
       
Fuser overheat error1
SC544
       
Hot roller fusing lamp lower limit temperature detected
SC545
       
Fuser lamp overheat error 2
SC546
       
Fuser ready temperature malfunction
SC547
       
Zero cross signal malfunction/ Fusing temperature does not increase
SC548
       
Fusing installation error
SC550
       
Fusing web end
SC551
       
Pressure roller thermistor open
SC552
       
Pressure roller warm up error
SC553
       
Pressure roller overheat
SC554
       
Pressure roller low temperature abnormal
SC555
       
Pressure roller ready temperature abnormal
SC557
       
Pressure roller temperature does not increase
SC558
       
Zero cross signal abnormal
SC590
       
Exhaust/Fusing fan motor error/used toner collection motor error
SC591
       
Toner supply motor error
SC592
       
Toner bank motor error
SC599
       
Copy exit tray motor lock
Troubleshooting Tips:
SC500:Too much load on the drive mechanism
·                     Some gears or other rotating parting has been jammed.
·                     Developing unit is over toned.
·                     Main motor or its driving board is defective.
*Before replacing motors or sensors, first check the mechanical load.
SC 541:Fusing thermistor open:
·                     Machine is plugged into low line voltage.
·                     Fixing thermistor is defective or out of position.
·                     Some loose connection
·                     Power Supply board defective
SC590eft exhaust fan motor error
·                     Loose connection of the exhaust fan motor.
·                     Too much dust in the fan causing too much load on the motor driver.
(e) 6XX: Communication errors
CODE
       
POSSIBLE CAUSE
SC600
       
Communication Error Between Main Control and Operation Panel Boards
SC634
       
Key/ Card Counter Device Error
SC636
       
Communication Error Between BICU & Paper Feed Control PWA
SC696
       
Communication Error Between Engine Boad and Finisher
Troubleshooting Tips:
SC621:ADF connection error
·                     An incorrect ADF is installed on the machines.
*The connector of the ADF is removed while the machine is in the energy save mode.
(f) 7XX: Peripherals Problems
CODE
       
POSSIBLE CAUSE
SC700
       
RADF Original Pickup Malfunction
SC702
       
RADF Feed Motor Lock
SC703
       
RADF Transport Motor Lock
SC704
       
RADF Original Exit Motor Lock
SC705
       
RADF Bottom Plate Motor
SC721
       
Sorter Bin Motor
SC722
       
Finisher/Sorter Jogger Motor
SC727
       
Finisher Stapler Rotation error
SC728
       
Finisher paper stack height error
SC733
       
Finisher Lower Tray lift Motor
SC760
       
ADF Gate Abnormal
SC770
       
Display Editor Abnormal
Troubleshooting Tips:
SC700:ADF pickup problem
·                     Home sensor is defective
·                     ADF board or pickup roller mechanism is defective.
SC733:Finisher lower tray lift motor
·                     stack height sensor or lower tray limit sensor may cause this problem
(g) 8XX: Controller Errors
CODE
       
POSSIBLE CAUSE
SC800
       
Startup Without Video output End
SC804
       
Startup Without Video Input End
SC818
       
Watchdog Error, Software Malfunction
SC819
       
Kernel Mismatch, Download Firmware again
SC820
       
Self Diagnostic Error,Download Firmware again
SC855
       
Wireless LAN card problem detected
SC857
       
USB Interface Error Detected
SC868
       
Incorrect Data is detected in the SD card
SC870
       
Address Book Data stored on the hard disk was abnormal
Troubleshooting Tips:
SC 826:Self diagnostic error:
NVRAM on the controller board is defective and must be replaced.
       
SC855:Wireless LAN card error
·                     Poor Connections between LAN card and the printer
·                     Defective controller board.
·                     Defective wireless LAN card.
       
Disclaimer:
       
Please note that this detail is just for information. Do not try to repair a machine if you are not a qualified technician. Technicians should also not take this information as a substitute of technician manuals.
       
CODE
       
POSSIBLE CAUSE
SC410
       
paper seperation leak
SC411
       
Separation bias leak error
SC420
       
Cleaning motor lock
SC422
       
PCC Leak
SC430
       
Quenching lamp error
SC440
       
Main motor lock/drum
SC441
       
Development motor lock
SC450
       
Paper transfer bias leak
SC451
       
Paper transfer belt motor lock
SC452
       
transfer belt mark detection error
SC455
       
Paper transfer belt discharge corona current leak
SC456
       
Paper transfer unit position error
SC457
       
Image transfer belt cleaning unti position error
SC460
       
Thermistor 1 temperature error
SC461
       
Thermnistor 2 error
SC471
       
Transfer Belt HP sensor error
SC490
       
Toner supply motor leak
SC492
       
Cooling an motor lock
SC493
       
Exhaust fan motor lock
SC495
       
Toner recycling unit error
SC496
       
Toner collection bottle error
SC497
       
Toner recycling motor error
SC-101
       
Exposure lamp, lamp stabilizer board, dirty white plate, dirty optics, SBU board, CCD
SC-103
       
Power problem
SC-104
       
Exposure lamp problem, main relay optics board, electrical noises or communication error
SC-105
       
Zero cross, main relay, optics board, FUSE 804 on DCPS or AC drive board on FT series
SC-120-123
       
Scan home problem, sensor, scan motor, (EX-IPU board or fuse FU103 Aficio 400, 401, 500)
SC-121
       
Scan home or fuse FU4Scan home or fuse FU106 Aficio 550/650
SC-124
       
Scan motor encoder or scan motor
SC-125
       
Scanning to slow speed
SC-126
       
Scanning too fast speed
SC-127
       
Scan motor or optics board
SC-128
       
Scan start speed wrong; motor, board, drive section
SC-129
       
Scan speed problem; motor or PSU
SC-130
       
SBU error
SC-140 / 141
       
Lens vertical home sensor
SC-142 / 143
       
Lens horizontal home sensor
SC-144 /145
       
3rd scan home sensor problem
SC-190
       
EX-IPU board Aficio 400, 401, 500Optics thermistor FT 7950, 7960, 7970 series  
SC-192
       
Automatic SBU adjust error, SBU, BICU, exposure lamp regulator, exposure lamp, dirty white plate
SC-193
       
APS sensor FT 7950, 7960, 7970 series
SC-194
       
IPU white level detect (too low) same as 192
SC-300-303
       
Charge corona
SC-302
       
Laser (polygon) motor problem
SC-302
       
Charge roller, HVT, or fuse FU5 (AFICIO 340, 350 series, 355, 450 series, and 455)
SC-302-01, 02, 03, 04
       
Charge corona assembly Aficio 550/650 SC-303Charge corona wire cleaner, disconnected or time out for printer
SC-304
       
Charge roller problem, ID sensor problem
SC-305
       
Time out error for memory or EX-IPU board or fuse FU103 on Aficio 400, 401, 500
SC-310-314
       
Potential sensor
SC-320
       
Laser motor problem
SC-321
       
Laser write problem, BCU board, EX-IPU board
SC-322
       
Laser 1 synch. Problem
SC-323
       
Laser drive problem
SC-324
       
Laser drive excess current draw problem
SC-326
       
Laser 2 synchronization error
SC-327
       
Laser 1 home position error
SC-328
       
Laser 2 home position error
SC-329
       
Laser beam pitch error
SC-330
       
Laser diode no initial setting
SC-331
       
Laser diode home error
SC-332
       
Laser diode present position error
SC-335-338
       
Laser motor polygon problem
SC-340
       
TD sensor output error
SC-341
       
Developer motor lockupTD sensor adjust error Aficio 551, 551P, 700, 700P
SC-342
       
TD sensor adjust error
SC-345
       
Toner collect motor lockupDeveloper bias loss Aficio 551, 551P, 700, 700P
SC-346
       
Toner recycle motor disconnected
SC-350
       
ID sensor error
SC-351
       
Vsg problem, bad drum, ID sensor
SC-352
       
TD (toner density) sensor problem or bad toner mix
SC-353
       
Vsp problem; image density sensor, drum, HVT, developer bias, needs cleaning
SC-354
       
Vsp problem; image density sensor, drum, HVT, developer bias, needs cleaning
SC-355
       
Toner density sensor or under toned
SC-356
       
Toner density sensor or over toned
SC-358
       
Image density sensor, drum, toner spray
SC-360
       
Hard disk drive error 1
SC-361
       
Hard disk drive error 2Incomplete drum potential calibration, check imaging formation assembly FT 7950, 7960, 7970
SC-362
       
Image compression errorHard disk drive error Aficio 551, 551P, 700, 700P SC-363Data transmission error
SC-364
       
Data transmission time out errorVd out of specs, drum, drum potential sensor, charge corona FT 7950, 7960, 7970Hard disk drive error Aficio 551, 551P, 700, 700P
SC-365
       
Image storage errorVI out of specs, drum, drum potential sensor, charge corona, dirty optics FT 7950, 7960, 7970
SC-366
       
CRC error Aficio 550/650Vr out of specs, drum, drum ground FT 7950, 7960, 7970Hard disk bad sector maximum Aficio 551, 551P, 700, 700P
SC-367
       
Hard disk bad sector maximum Aficio 551, 551P, 700, 700P
SC-370-01 thru 07
       
Drum potential sensor error Aficio 550/650
SC-370-374
       
IMAC error Aficio 551, 551P, 700, 700P
SC-376, 380, 382, 384, 386, 388
       
Data transmission problem Aficio 551, 551P, 700, 700P
SC-390
       
CRC error Aficio 551, 551P, 700, 700P
SC-390-1
       
Toner density sensor error
SC-390-2
       
Toner density sensor error
SC-391
       
Developer bias problem or FU103 on Aficio 550/650  Image storage address error Aficio 551, 551P, 700, 700P
SC-392
       
Toner density sensor
SC-395
       
Developer bias problem
SC-400, 401
       
Transfer roller error Aficio 551, 551P, 700, 700P
SC-401
       
Transfer roller positive error problem
SC-401-1
       
Transfer roller/belt short
SC-401-2
       
Transfer roller/belt open or fuses FU104, FU115, FU116 Aficio 550/650
SC-402
       
Transfer roller negative error problem or open
SC-403
       
Transfer belt position error, electromagnetic clutch release or fuse FU5
SC-405
       
Transfer belt position error, electromagnetic clutch release or fuse FU5
SC-405
       
Scanner problem; BCU, EX-IPU board or SCU on Aficio 400, 401, 500
SC-411
       
Separator bias
SC-430
       
Quenching lamp error
SC-440
       
Main motor locked or drum motor locked
SC-441
       
Developer motor locked
SC-490
       
Exhaust fan problem or ozone fan problem
SC-491
       
Laser cooling fan locked
SC-492
       
Cooling fan problem
SC-493
       
Bridge fan problemExhaust fan locked Aficio 551, 551P, 700, 700P
SC-494
       
Fuser fan locked
SC-495
       
Toner recycling unit problem
SC-496
       
Toner collector bottle problem
SC-497
       
Toner recycling motor problem
SC-500
       
Main motor lockedBypass motor locked FT 7950, 7960, 7970
SC-501-1 & 21st
       
Tray lift problem
SC-502-1 & 22nd
       
tray lift motor problem
SC-503-1 & 23rd
       
tray lift motor problem
SC-504-1 & 24th
       
tray lift problem
SC-505
       
LCT tray
SC-506
       
Optional tray motor locked
SC-507
       
LCT motor locked
SC-508
       
Tandem rear fence motor
SC-509
       
Tandem side fence motor
SC-510-1 & 2
       
LCT lift problemPaper feed motor problem Aficio 551, 551P, 700, 700P
SC-511
       
Tandem side fence motor errorLCT motor error Aficio 551, 551P, 700, 700P
SC-515
       
Tandem rear fence motor Aficio 551, 551P, 700, 700P
SC-516
       
Tandem side fence motor Aficio 551, 551P, 700, 700P
SC-520
       
Duplex or fuser drive problem FT 7950, 7960, 7970
SC-521
       
Duplex side fence drive problem
SC-522 & 523
       
Duplex jogger home position FT 7950, 7960, 7970
SC-524
       
Duplex end fence drive problem
SC-530
       
Bypass motor locked or fuse FU106 on Aficio 551, 551P, 700, 700P
SC-531
       
Fusing duplex motor locked
SC-541
       
Fuser thermistor open
SC-542
       
Fuser temperature too low or fuse FU107 on Aficio 551, 551P, 700, 700P
SC-543
       
Fuser temperature to high
SC-544
       
Fuser temperature too low
SC-545
       
Fuser temperature to high
SC-546
       
Fuser ready temperature unstable
SC-547
       
Zero cross problemFuser lamp stays on, AC drive board, optics board FT 7950, 7960, 7970
SC-548
       
Fuser unit not installed
SC-590
       
Toner collector motor problemCooling fan Aficio 220/270 series
SC-591
       
1 bin tray motor
SC-600
       
Communication problem between SCU and operation
SC-601
       
Communication problem between BICU and scannerCommunication problem between BCU and EX-IPU board Aficio 400, 401, 500Communication problem between SBU and SBICU Aficio 550/650Communication problem between MCU and BICU Aficio 551, 551P, 700, 700P SC-602Communication problem between BICU hard disk drive boardCommunication problem between BCU and fuser control unit on Aficio 400, 401, 500Communication problem between Hard disk drive board and SBICU Aficio 550/650Communication problem between BICU and hard disk drive board Aficio 551, 551P, 700, 700P
SC-602-2, 2, -3
       
Communication problem between BICU and ADF
SC-604
       
Communication problem between BCU and high voltage board
SC-605
       
Communication problem between SCU and BCU
SC-610
       
Communication problem between IOB and duplex unit
SC-610, 611, 612
       
Communication problem between BICU and ADF
SC-620
       
Communication problem between BICU and ADF
SC-621
       
Communication problem between BICU and finisher
SC-623
       
Communication problem between BICU and paper tray unit
SC-624
       
Communication problem between BICU and LCT
SC-625/626
       
GA5 data transfer error; EX-IPU or softwareCommunication problem between BICU and finisher Aficio 551, 551P, 700, 700PCommunication problem between BICU and LCT Aficio 1035, 1045
SC-627
       
Communication problem between BICU and LCT Aficio 1035, 1045
SC-630
       
Communication problem between line adapter and CSS center (Japan)
SC-635-636
       
Communication problem between BICU and paper feed board Aficio 551, 551P, 700, 700P
SC-640
       
BICU data transfer sum check error
SC-641
       
BICU control data transfer problem
SC-650, 653
       
Key card (Japan)
SC-670
       
Engine or BICU error
SC-672
       
Op panel to controller problem
SC-690
       
BICU problem (12C)
SC-691
       
Communication problem between BICU and fax controllerBICU problem (12C) Aficio 1035, 1045
SC-692
       
Communication problem between BICU and print controller boardBICU problem (12C) Aficio 1035, 1045
SC-694
       
Communication problem between BICU and scanner board
SC-696
       
Communication problem between IOB and finisher
SC-700
       
ADF P/U problem
SC-701
       
ADF P/U problem
SC-702
       
ADF feed in motor
SC-703
       
ADF transfer motor
SC-704
       
ADF feed out motor
SC-705
       
ADF bottom plate motor
SC-720
       
Finisher transport drive motor problem
SC-721
       
Finisher tray shift or shift motor problem
SC-722
       
Finisher jogger motor
SC-723
       
Finisher stack feed motor problem
SC-724
       
Finisher stapler hammer motor
SC-725
       
Finisher stack feed out motor
SC-726
       
Finisher shift/lift motor
SC-727
       
Finisher stapler rotation motor
SC-729
       
Finisher punch motor
SC-730
       
Finisher stapler position motor
SC-731
       
Finisher exit guide motorFinisher exit open/close motor problem Aficio 1035, 1045
SC-732
       
Finisher up tray shift motor problem
SC-733
       
Finisher stack feed out motorFinisher lower tray shift motor problem Aficio 1035, 1045
SC-734
       
Finisher lift motorFinisher lower tray shift motor problem Aficio 1035, 1045
SC-735
       
Finisher exit guide motorFinisher pre-stack motor Aficio 551, 551P, 700, 700P
SC-736
       
Finisher exit guide plate motor
SC-737
       
Finisher waste stapler full
SC-738
       
Finisher shift tray lift motor
SC-740
       
1000 sheet finisher error
01: Shutter error
02: Exit error
03: Upper exit plate error
04: Jogger motor
05: Stapler motor
06: Stapler hammer motor
07: Tray lift motor
08: Shift tray height sensor
09: Back up RAM
0A: Communication error
SC-741
       
1000 sheet finisher error in saddle stitch area
01: Position plate motor
02: Folder roller motor
03: Shutter guide motor
04: Booklet jogger motor
05: Stapler motor
06: Folder plate motor
07: Connector
08: Switch
SC-750
       
Interchange connection problem
SC-751
       
Bridge connection
SC-752
       
Finisher connection
SC-760
       
ADF gate problem
SC-770
       
Shift tray motor
SC-800
       
Control board bad
SC-804
       
Control board bad
SC-819
       
Software application error
SC-820
       
Control board or software
SC-821
       
Control board
SC-822
       
Bad HD
SC-823
       
Bad control board or NIC
SC-824
       
NVRAM or battery bad
SC-826
       
NVRAM bad
SC-827
       
Memory problem
SC-828
       
Bad control board or firmware
SC-829
       
RAM DIMM or control board bad
SC-835
       
Control board or connector
SC-836, 837
       
Font ROM bad
SC-838
       
Clock generator problem
SC-850
       
NIB or control board bad
SC-851
       
IEEE 1384 interface board or control board bad
SC-860, 861
       
Hard drive problem, connection or cable
SC-862, 863
       
Returned, Bad sector in hard drive
SC-864
       
Abnormal HD data transfer
SC-865
       
Hard drive error
SC-900
       
Electrical copy counter problem reached 10 million or NVRAM problem
SC-900-01
       
Mechanical counter
SC-901
       
Mechanical counter or fuse FU4
SC-921
       
MSU hardware errorCopier feature expander hardware error Aficio 220/270
SC-940
       
Main switch problem or main board
SC-951
       
Gate signal error
SC-953
       
Scanner image setting error (Software)
SC-954
       
Printer image setting error
SC-955
       
Memory setting error
SC-956
       
Scanner parameter error
SC-957, 958
       
Scan error
SC-959
       
Printer setting ID error
SC-960
       
Printer return ID error
SC-961
       
Printer ready ID error
SC-962
       
Memory setting ID error
SC-963
       
Memory finishing error
SC-964
       
Printer ready error
SC-970
       
Scan error
SC-980
       
Program loading error or hard drive access error
SC-981
       
Hard drive response error
SC-982
       
Hard drive construction error
SC-984
       
Hard drive response errorControl board, BICU or connection bad Aficio 1035, 1045
SC-985
       
Control board, BICU or connection bad Aficio 1035, 1045
SC-986
       
Software problem
SC-990
       
Communication problem between BICU and input output board or software performance error
SC-991
       
Software problem
SC-996
       
FCU board or firmware problem
SC-997, 998
       
Software or missing RAM or missing DIMM
SC-999
       
Program version error or fuser FU6 Program download problem, BICU, IC, NVRAM bad, power loss, board installed wrong Aficio 1035, 1045
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-8-20 20:20 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top