| |
| | |

Printer Forum   

 Forgot password?
View: 843|Reply: 8

MPC 2500 Calibration Problem

[Copy link]

Post time: 2012-12-26 19:38:38 |Show all posts
Every time I try to calibrate I get a message, Test pattern could not be printed. I did forced line adjust. color registration adjust and I still get the same message. Has anyone seen this prblem?

Post time: 2012-12-27 08:30:37 |Show all posts
Also remove the laser shutter, we have had numerous problems with these.

Post time: 2012-12-27 07:00:04 |Show all posts
Update the firmware!!!! The laser shutter isn't opening enough, therefore the patches won't print on the belt and it fails test pattern.

Post time: 2012-12-27 05:17:31 |Show all posts
Maybe try restoring factory ACC settings and see what happens, or upload the NVRAM data to an SD card and do a memory clear. (I see you're from Oakley. I used to live in Brentwood, and Antioch before that.)

Post time: 2012-12-27 03:43:10 |Show all posts
tray one has to be plain paper , you have to set this up through user , and make sure screen displays tray 1 as nothing but A4

Post time: 2012-12-27 01:52:59 |Show all posts
And put a few extra white pages - 10ish - behind the colour test chart when it scans.

Post time: 2012-12-27 00:00:49 |Show all posts
Are all your trays set to a different thickness of paper? At least one tray has to be set to plain paper for ACC to work. Any toners low? That will stop ACC running.

Post time: 2012-12-26 22:47:14 |Show all posts
Toner density good I toned it up and still have the same problem.

Post time: 2012-12-26 21:12:21 |Show all posts
The Color MFP's check toner density first, if it is too light you have to tone up before the calibration will work.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2017-6-26 06:01 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2017 OASQ.

To Top