| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 109|Reply: 3

I have canon pixma ip 4300 and error 5110 with alternate green amber l

[Copy link]

Post time: 2012-11-17 11:40:26 |Show all posts
I have canon pixma ip 4300 and error 5110 with alternate green amber lights flashing
--Canon PIXMA iP4300 InkJet Photo Printer

Post time: 2012-11-23 09:05:19 |Show all posts
As a technician, I have worked on tons of printers. This particular error had stumped me for a while, but I finally found the cause. As others had pointed out before, it can have alot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you lubricate the sliders with some white grease (don't get it on the small wipers or the black caps) the mechanism can now slide more freely, and the unit can park the head properly without giving you the dreaded head homing error 5100 (or E-2-2 on the LCD display) Keep in mind that this repair will probably require you to remove the right panel off of the printer to gain access to the purge mechanism. There are two screws behind the printer, and two in front for each corrosponding side panel (the front screws are behind the grey front panel of the printer - open the top cover to see the clips which hold the front cover on) Hope this helps some of you out.

Post time: 2012-11-21 21:40:51 |Show all posts
Take it back and exchange it

Post time: 2012-11-19 23:46:40 |Show all posts
anon PIXMA iP1000
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark "After service mode Pls use  software for permanent reset"
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-12-20 02:22 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top