| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 813|Reply: 2

How to fix a canon pixma MP 280 with errors e14 and e05 with a continuous flow system attached?

[Copy link]

Post time: 2012-6-8 13:57:57 |Show all posts
The continuous flow system was installed on a canon pixma MP 287(brand new) which was a lemon, and then still hardly not used, being taken out of the MP287 and installed on the also brand new MP280. It displays on the computer that the cartridges which are the same for both machines, are not bonding with the MP280. We are desperate to get this fixed - please advise
---Canon PIXMA  MP180 All-In-One InkJet Printer---Canon PIXMA  MP180 All-In-One InkJet Printer

Post time: 2012-6-8 17:23:51 |Show all posts
Hello,
Below the link down load your driver according to your windows.and unistall your old driver then restart.
http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/InkJet/PIXMA_MP_series/MP280.aspx?type=download&page=1
Thanks
Tony

Post time: 2012-6-8 15:49:30 |Show all posts
For error e 1 4 = better take it out and wipe the smudges
for error e 0 5 = check the ink catridge, when ciss installed most installer make mistake by making the red ink hole at the circle made on it. you must make the hole slightly under it,  the small hole. the big round is under the thick plastic lid, so the pipe we put will make the catridge move from the original position. or your cartridge just spoilt.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-11-25 16:08 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top